Hummingbird Ti in front of the hills

The Hummingbird, in titanium

In a lot of ways, titanium is overhyped. It is a super material, but only if you use it correctly. Compared to steel, titanium has the same strength, half the stiffness and half the density. Done right, you get a frame that should last you a really long time and is 30% (~2 lbs) lighter and a touch stiffer than steel.

Titanium bikes usually fall into two buckets:

  • Super premium custom: super light, internal routing, anodizing, Cerakote. We build some of these in our own shop.
  • Low-cost, mass-produced: poke around AliExpress, and you'll get a sense of the floor of what a production titanium frame costs.

For our Core titanium frames, we didn't want either route. We like our Core frames to skew utilitarian and durable, so they last many seasons. Even though these are production frames made in Taiwan, we wanted them to feel special.

Special is not cheap. For perspective, these frames cost us 2–3x what big brands pay for their carbon frames! But at the end of the day, our guiding principle is making good bikes, not maximizing our profit margins.

It took us more than a year to develop the titanium Hummingbird. We made a small batch of 32in titanium Hummingbirds this spring, which sold out pretty quickly. This time around, we expanded the lineup to include 29in wheels and smaller sizes. Now that we have the complete lineup, we're pretty excited about how the Core titanium frames look, ride, and feel.

29 vs 32: Options, not standards

Hummingbird Ti29 from the front three-quarter
Hummingbird Ti32 side profile

Left: Hummingbird Ti29, custom build weighing in at 22 lbs! Right: Hummingbird Ti32 with the Shimano XT build.

When we first started experimenting with 32in wheels, we were shocked by how much ground they could cover. We dreamed up a titanium version: lighter and a little stiffer, it would be a rocket ship.

That said, 32in isn't for everyone, especially if it doesn't fit you. Plenty of riders also want an intuitive, familiar feel, which is why the (29) Hummingbird is so popular in the first place.

Fit is the very first thing we focus on when we design a bike, so we split the size range by wheel size, with an overlap at ML. If you're XL, you should really try 32in. It will change your life.

Hummingbird Ti29 is the bike that likes to be pushed: a 120mm fork, 29in wheels, a 66° head angle and 430mm chainstays. Those are the same numbers that made the steel Hummingbird what it is.

Hummingbird Ti32 is for big days out and covering a lot of ground. Some people call that XC; we call it "riding our bikes." It has a 100–110mm fork, 32in wheels, a 66.5° head angle and 445mm chainstays. The big wheels roll over everything and hold their momentum. You could race XC on it, but we drew it for exploring.


Hummingbird Ti29 and Ti32 side by side at the same scale

ML Ti29 on the left, L Ti32 on the right, same scale and ground line.

Once you get used to the big wheels, it feels weird going back! But at the end of the day, it depends on how you ride. If your terrain is rocky, rooty, twisty, I would still go 29. If you're shorter, go 29. It isn't about which one is better. It's about having options.

How it's made

Inside the ORA titanium factory in Taichung, Taiwan

In my experience, there are no bad manufacturers in Asia. Everyone works really hard and takes pride in their work, but each factory has its own specialties and price points. Our job is to design around our partners' strengths.

ORA, our titanium partner, is really good at tube butting and forming. Take the HBTi's down tube, for example:

Down tube of the Ti32 size L from the frame drawing, with the bend, head tube and fork

The Ti32 size L down tube, cut from the frame drawing: 44mm diameter, butted 0.95/0.75/1.4mm, with the bend to clear the fork crown.

The down tube has an extra-thick 1.4mm butt at the head tube, and it takes 5 passes through the die and mandrel to draw it. The precise dimensions of each step are a trade secret. The thick butt makes the frame extremely durable without needing a gusset, while the 0.75mm thin section lets the frame flex and saves weight.

ORA's tube butting machine in Taichung
ORA's tube butting machine in Taichung, detail

ORA's tube butting machine. Taichung, Taiwan.

What does that mean in practice? Lighter, more durable frames with tight clearances. No millimeter is left on the table.

Head tube and down tube bend on the Hummingbird Ti32
Bottom bracket and chainstay on the Hummingbird Ti32

The tight bends in the 32in's down tube and chainstay are impossible for us to do in house.

Another nice feature is the seat cluster. ORA uses wire EDM to make precise cuts and miters. That lets us ovalize the top tube and "flow" the seatstays into the junction, much like our 3D-printed Y-yokes.

Wire EDM cutting a titanium tube miter
Seat cluster on the Hummingbird Ti32

Left: wire EDM tube miter. Right: seat cluster on the Ti32.

Four things you may have missed

Front of the Hummingbird Ti with cables wrapping around the head tube

1) A "real" 32in fork. We sourced a "real" 32in fork from X-Fusion. Apparently, bigger brands are eating up all the capacity for 32in forks, and aftermarket ones won't be available until spring 2027. We wanted to get people rolling now. "Right side up" forks are much stiffer than the USD forks that often get paired with 32in wheels.

2) The dropouts. They're our own design, the same ones we use on our custom bikes, and among the most compact machined UDH dropouts out there. You can get a smaller dropout with 3D printing, but it costs a lot more, and honestly, we like the utilitarian look of a machined one.

32in fork and front wheel on the Ti32
Machined UDH dropout

Left: the 32in fork on the Ti32. Right: machined UDH dropout.

3) Cable routing. Look closely and you'll spot a TINY improvement to the cable routing: we clocked the first cable guides 30 degrees off the centerline. That pre-routes the cables to wrap around the head tube, which cleans up the front of the bike. It's a minor improvement, and we're proud of it.

4) The finish. Raw, glass-blasted titanium with brushed logos. No paint to chip, nothing to rust, and a matte surface that burnishes and builds character over time.

Cables wrapping around the head tube on the Ti29
Brushed Neuhaus logo on the raw titanium down tube

Left: cables wrapping around the head tube on the Ti29. Right: glass-blasted finish with the brushed logo.

The last word

For a small brand, every new model is a big undertaking. Our Core Hummingbird has been a huge hit, and we wanted to make sure we got titanium production right.

On the surface, it looks like a copy and paste of the Hummingbird geometry, but it's a totally new model, with a more spirited ride and lighter weight. It is the combination of our years building titanium frames in-house and the experience of our manufacturing partner in Taiwan.

Hummingbird Ti32 three-quarter view on the trail

The details

Both frames are $2,999. The Ti29 comes in S, M and ML. The Ti32 comes in ML, L and XL. You can buy a frame on its own, or have us build it with Shimano XT: $5,599 for the Ti29 and $5,999 for the Ti32. Complete bikes are assembled one at a time in our shop.

This is a small batch. When a size is gone, it's gone until the next one.

Back to blog